Wireless for the Real World
The Tempest900 BaseStation is a 4-channel Frequency Hopping Spread Spectrum (FHSS) digital wireless intercom system operating in the 902 to 928 MHz band ensuring comprehensive coverage and wide reach while offering high resistance to
multi-path interference. The front panel LCD display provides real time status including battery monitoring of active BeltStations and easy access to the hardwire intercom settings and levels. Each BaseStation is capable of Call and
Remote Mic Kill. When ordering, reference Part Number TMP-B409.
The Tempest900 4-Channel BaseStation is supplied with a single omni-directional antenna (RP-TNC RF connector). On the rear is a RJ-45 connector for a (optional) remote transceiver. The Remote Transceiver allows the antenna functionality to
be located up to 1500 ft. (450 m) away from the BaseStation over CAT 5/6 cable with no loss of RF signal. The CAT 5/6 cable also supplies power to the remote transceiver. An additional RJ-45 enables remote monitoring and control of the
entire wireless system over a Local Area Network (LAN) with the aid of the Tempest T-Desk software.
The 4-Channel BaseStation connections include a 2-wire interface with M/F 3-pin XLR loop thru and one 4-wire RJ45 port per channel. The 2-wire interface is
compatible with Clear-Com,® RTS,® and Telex® intercom systems, and includes an auto-null circuit.
The 4-Channel BaseStation is supplied with two whip antennas (RP-TNC RF connector). On the rear is a RJ45 connector for a (optional) remote transceiver.
The remote transceiver can be located up to 1500ft (450m) away from the BaseStation over CAT-5/6 cable with no loss of RF signal.